---
title: "How to enable dynamic tariff-based charging (Smart Control) on the Studer web portal"
description: "**This function is only available with the devices from the next series and when your installation is connected to the Studer web portal.** The \"Smart Control\" function, in \"Tariff-based\" mode, allows your system to automatically recharge the storage battery from…"
url: "https://studer-innotec.com/support/faq/batteries/battery-management/how-to-enable-dynamic-tariff-based-charging-smart-control-on-the-studer-web-portal/"
updated: "2026-09-01"
category: Battery management
tags:
  - AC source
  - battery
  - energy management
  - grid
  - next series
  - next1 inverter
  - next3 inverter
  - Smart Control
---

# How to enable dynamic tariff-based charging (Smart Control) on the Studer web portal

**This function is only available with the devices from the next series and when your installation is connected to the Studer web portal.**

The "Smart Control" function, in "Tariff-based" mode, allows your system to automatically recharge the storage battery from the grid whenever the electricity price drops below a threshold that you define. Please note that your power consumption from the grid may be higher when this function is enabled, as the grid is used to charge your batteries when the tariff threshold you have set for recharging the batteries is reached. Here is how to enable it from the Studer web portal.

 

##### **Procedure:**

1. Log in to the Studer web portal ([portal.studer-innotec.com](https://portal.studer-innotec.com)), then select the installation on which you want to enable the dynamic tariff.
2. Click the pencil icon, in the left-hand menu, to open the "Edit the installation" window.
    ![Dynamic pricing steps 1](https://studer-innotec.com/wp-content/uploads/2026/09/Capture-decran-2026-08-31-092125.png)
3. In the edit window, click the "Smart Control" tab.
    ![Dynamic pricing steps 2](https://studer-innotec.com/wp-content/uploads/2026/09/Capture-decran-2026-08-31-092403-300x273.png)
4. Check the "Enable smart control" box, then select the "Tariff-based" option.
    ![Dynamic pricing steps 3](https://studer-innotec.com/wp-content/uploads/2026/09/Capture-decran-2026-08-31-093300-300x221.png)
5. From the "Provider" drop-down list, select your electricity provider. (***Note:****If your electricity provider does not appear in the list, please contact our technical support ([support@studer-innotec.com](mailto:support@studer-innotec.com)) so that we can add it).*
    ![Dynamic pricing steps 4](https://studer-innotec.com/wp-content/uploads/2026/09/Capture-decran-2026-08-31-093358-300x215.png)
6. Fill in the "Tariff threshold for battery charging [ct/kWh]" field: this is the price threshold below which the system will automatically start charging the battery from the grid.
7. Fill in the "Grid consumption power setpoint during charge [kW]" field: this is the maximum power the system is allowed to draw from the grid to charge the battery once the tariff threshold for battery charging is met.
8. Click "Save" to save the configuration.
    ![Dynamic pricing steps 6](https://studer-innotec.com/wp-content/uploads/2026/09/Capture-decran-2026-08-31-100940-v2-300x215.png)

**Your system will now use the grid to charge your batteries when the tariff threshold you have set for recharging the batteries is reached.**